Save Fuel-efficient Pad of rectangle(car exhaust)

Before Installing

1. Open Engine Cover

2. Start Engine

3. Check & Record RPM meter

4. Check exhaust pipe if carbon particle out of pipe

Start Installing

1. Stop Engine

2. Open Air Box.

3. Clean or Replace Air Filter.

4. Install the Pad (small hole) facing Engine intake (Cut the pad if necessary to fit into Air box).

5. Close & lock tight Air Box cover.

Finish Installation

1. Start the Engine . Pedal 10 times to RPM 3000 Warm up pad ( Clean Nozzle ,Valve, Cylinder Carbon out Pipe).

2. Check RPM meter if back to normal number or lower.

3. You will feel Pedal soft, power up a lot, check drain or smoke out (HC, CO, NOx become lower).

Cars (gasoline cars) Highway is about 15~30% and downtown is about 10~20% (Because the vehicle speed and driving habits of each vehicle type will be different).

Directly into the car engine air intake filter, it can be installed on its own is very simple (no tools), no contact with the power supply and body structure, etc., to ensure safety and reliability.

Eco / low carbon: Remove Carbon Deposition.

[Reduce PM2.5] Nozzle ,Valve, Cylinder Carbon out Pipe.

Power Increasing: Completed Combustion to increase power effect.

Fuel Saving: Reducing Fuel after removing carbon and completed combustion.

[The effect will be different based on car models, road situation, and driving way].

Theory>